微波雷达目标信号模拟器及其应用

本文为在野战条件下检测雷达测距系统的性能提供一种新型微波目标信号模拟器,闸述其工作原理及功能。除在检测雷达测距系统性能上已得到实际应用外,还论述了可以进一步开发的应用项目,因为不受场地和气候条件的限制,从而获得较好的效能、效率和效益。     

大口径火炮制退机内腔压力测试技术

从火炮反后座装置的特殊结构及测试技术两方面详细分析、总结了我国几种大口径火炮在内腔压力测试时出现不正常现象的原因,并从传感器的机械度、传感器的封装技术、传感器的绝热处理、传感器的频响和排气工装等几个方面改进内腔压力测试的技术工艺方法,并用改进后的方法对155-2型火炮的内腔压力进行了试验,结果表明其工艺方法可准确地测试出内腔压力曲线,从而解决了多年来火炮后座阻力测试技术中存在的关键问题。     

红外热像仪标定方法

为了由红外图像得到目标的经度、纬度和高度信息,对目标精确定位,提出一种新的红外热像仪标定方法.以针孔成像模型作为红外热像仪成像模型,选择小热源作为标定点,以 WGS-84坐标系作为世界坐标系,引入北东天(NEU)坐标系,先通过借鉴主动视觉的思想控制热像仪绕光心旋转得到外部参数,然后借助GPS接收机测得标定点世界坐标,利用这些标定点的像素坐标和世界坐标由最小二乘估计求解内部参数.实验表明新方法精度高、成本低,适合于实际应用.     

CON/SLK due date assignment and scheduling on a single machine with two agents

We consider scheduling problems involving two agents (agents A and B), each having a set of jobs that compete for the use of a common machine to process their respective jobs. The due dates of the A‐jobs are decision variables, which are determined by using the common (CON) or slack (SLK) due date assignment methods. Each agent wants to minimize a certain performance criterion depending on the completion times of its jobs only. Under each due date assignment method, the criterion of agent A is always the same, namely an integrated criterion consisting of the due date assignment cost and the weighted number of tardy jobs. Several different criteria are considered for agent B, including the maxima of regular functions (associated with each job), the total (weighted) completion time, and the weighted number of tardy jobs. The overall objective is to minimize the performance criterion of agent A, while keeping the objective value of agent B no greater than a given limit. We analyze the computational complexity, and devise polynomial or pseudo‐polynomial dynamic programming algorithms for the considered problems. We also convert, if viable, any of the devised pseudopolynomial dynamic programming algorithms into a fully polynomial‐time approximation scheme. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 416–429, 2016     

A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.     

The investigation of NTO/HMX-based plastic-bonded explosives and its safety performance

3-nitro-1,2,4-triazol-5-one (NTO) is the main component of insensitive munitions (IM) formulation because of its outstanding insensitive properties.In this paper,a series of NTO/HMX-based composite explosives were prepared and characterized.The study focuses on the effect of NTO on the performance of the formulations,especially the safety performance.The results revealed that the mechanical sensi-tivity of formulations was associated with NTO content,as well as the thermal conductivity,specific heat capacity and Arrhenius parameters.Then,the high amount of NTO using in formulation was proved to be helpful for NTO/HMX-based formulation to exhibit good thermal safety.Besides,by accelerating rate calorimeter (ARC) and a modified cook-offequipment,the pressure and pressure rise rate were proved as the important indicator for judging the thermal safety performance in confined spaces.Finally,the numerical simulation was used as a credible method for predicting the respond temperature of cook-off experiment.     

磁流变阻尼器响应时间仿真与试验研究

响应时间是磁流变阻尼器（Magnetorheological Damper,MRD）重要性能指标之一。为分析MRD响应时间及影响因素,建立了MRD动态响应模型,提出了一种基于Ansoft和Adams联合仿真分析MRD响应时间的方法,并通过仿真与试验相结合的方法分析了阶跃电流幅值、活塞运动速度以及系统刚度等因素对MRD响应时间的影响。仿真结果和试验数据表明：MRD响应时间随活塞速度和系统刚度的增大呈减小趋势,随阶跃电流幅值的升高呈增大趋势。同时证明通过联合仿真分析MRD响应时间和影响因素的方法是有效的。     

基于ANSYS的电子功能部件热可靠性仿真预计

常规试验方法对于弹上电子功能部件热可靠性的分析验证,不仅所需周期长、代价大,而且容易受到试验设备及人员素质的限制,往往导致数据数量和质量的双重折扣.为此,基于ANSYS对借助于贴片式电子元器件改造的电子功能部件进行热可靠性仿真预计.通过设置不同的环境温度,模拟电子功能部件服役期不同的工作状态,并结合失效率预计模型,计算关键元器件服役期内3种阶段的热失效率,实现对于改造的电子功能部件的热可靠性预计,同时利用加速退化试验验证其准确性.仿真结果表明,热可靠度为0.9834,远大于规定的服役期热可靠标准,印证了贴片式电子元器件应用的可行性.     

Transverse relaxation characteristic and stress relaxation model considering molecular chains of HTPB coating based on pre-strained thermal aging

In order to accurately describe the transverse relaxation characteristic and stress relaxation modulus of HTPB coating during pre-strain thermal aging process, a one month thermal aging test was carried out at 70 C with pre-strain of 0％, 3％, 6％ and 9％, respectively. The low-field 1H NMR and stress relaxation modulus tests were carried out for HTPB coating at different aging stages. The stress relaxation model considering the molecular chains was proposed according to the changes of crosslinking chain and dangling chain of HTPB coating during pre-strain aging. The results showed that with the increase of aging time, the decay rate of transverse relaxation curve became faster, the transverse relaxation time decreased, the value of combined parameter qMrl increased, the proportion of crosslinking chain decreased, while the proportion of dangling chain increased. Moreover, the stress relaxation modulus increased, the crosslinking network structure of HTPB coating became denser and the degree of cross-linking increased. At the initial aging stage, the pre-strain will destroy the crosslinking network structure of HTPB coating to a certain extent. With the increase of aging time, the effect of pre-strain will gradually weaken and the influence of aging on materials will gradually increase. The correlations between the stress relaxation model considering the molecular chains and the test results were more than 0.9950, which can accurately describe the stress relaxation modulus of HTPB coating during the pre-strain thermal aging process.     

激光大气数话同传系统的设计

给出了一套以激光作为信息传输的载体 ,单片机作为控制调度计算机 ,以 DSP作为高速语音压缩解压部件的激光大气数话同传系统设计。来自麦克风的语音信号经 A/ D转换后 ,由 DSP压缩成 2 .4kbps～ 9.6 kbps的串行数字信号 ,同时2 .4kbps～ 9.6 kbps的串行数字信号可由 DSP解压成 8k Hz13bit数字语音信号。经过压缩的语音数据和来自多串行口控制器的数据 ,通过单片机的协调 ,实现数据和语音信息在大气中的同时传输